Definition and introduction of coupling spring
Time:
2021-04-04 15:08
The coupling spring is also called serpentine spring. The raw materials used are mainly 60Si2MnA and 50CrVA data standards. The thickness can be 20 mm larger than Z1, and the width can be 30 mm larger than Z1. Serpentine tension springs are supplied in groups (one coil is one group, and each group is supplied to test the size of the customer's coil springs. One coil is one group: two coils are one group, four coils are one group, and six coils are one group). The torque scale of this product is 26-270000N · M, and the allowable relative radial displacement of the two half shafts is 0.5-3mm, the axial displacement is 4-20mm, and the angular displacement is 1 ° 15 '.
It is defined as Coupling Springs according to its role. The torque range of the coupling spring is 45N · M~800000N · M, the allowable relative radial displacement of the two half shafts is 0.5mm~3mm, the axial displacement is 4mm~20mm, and the angular displacement is 1 ° 15 '' '. The coupling springs are usually supplied in groups, for example, 1 piece=1 group; 2 pieces=1 group and 4 pieces=1 group, etc.
Hotline
Fax：0575-87759918
Tel：13675770888
Email：110079726@qq.com
Address: Zhisheng Temple (next to 888 Gas Station), Datang Town, Zhuji, Zhejiang
Copyright © Zhejiang Junma Spring Manufacturing Co., Ltd All rights reserved